Greetings All.
I was directed to come to this discussion page, because “ here “ is the info I need to get a definitive answer to, a quest..
Many years ago, I obtained a recording product called Protools TDM Mix, with a version of 5.1.3. running on a Mac 9600/350. with Mac OS 9...( I don’t remember which version of 9 ) But will dig into this mac info...soon.
Shortly after getting the system, I had an emergency, and had to tear it down and put it into storage, for about 26 years or so...
After that crisis...
I set it back up, and after a grueling ordeal with the order of card placement , everything fired up just like the day I got it...even the old CRT monitor..
I got a new flat screen monitor with a VGA port, and with an adapter to the Db-15 port on the stock IX-Micro Twin Turbo card, that works great, but I hate that Db-15 port on the Twin Turbo, with the adapter hanging off the card, always stressing the card port.
I have been searching for a great graphics card that will work with my 9600/350 and Protools, that has a VGA port, so I can dump the adapter...
Exactly ...Which graphics card could I use, that's better than the stock IX-Micro Twin Turbo, that I can just pop into the PCI slot, and get this hog going again, and where can I maybe find a card with software and drivers included ( as in, maybe a new, old, unopened box )
Last, I have an Adaptec AHA Power Domain 2940 UW, in it right now, but was buying 29402UW, to replace it with, and put that one in a G4, except this corona virus scandal in Canada killed that shipping the new unopened box .
I have an ATTO UL3d SCSI that Doesn’t recognize drives, in another Mac, so I’m trying to see if I can either get software/drivers for that one, or find another complete Adaptec 2940UL or 2940U2W...
What say Ye All.
All advice appreciated.