• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.
alectrona2988

Profile posts Latest activity Postings About

  • got a powermac 6400 off of ebay, can't wait for it to arrive. also getting a radeon 7000 to flash to a mac ROM and will transfer my g3 upgrade from my 6360 over. its gonna be a killer system 7 machine
    • Like
    Reactions: Snial
    finkmac
    finkmac
    you need a sata card too
    alectrona2988
    alectrona2988
    can you use SATA on an old world mac?! somewhere i have an sil3112 flashed for a powermac G4
    finkmac
    finkmac
    of course you can. the flashed sil3112s work on any pci powermac.
    i have a couple of pre-balled 1GHz 7455A chips and i'm thinking i want to get a 2002 eMac and a spare board, and swap one in. also i have a couple of dead G4 cards and the 2002 eMacs and iMac G4s have provisions for L3 cache. pretty sure you can tell what this girl is thinking about doing
    has anyone tried to upgrade the L2 cache or the CPU on a sonnet crescendo L2 card? i have an old G4 7400 card sitting around, plus a crazy idea... but i guess i would only just be able to get 1MB of L2 from 512KB given my equipments capabilities...
    Phipli
    Daniël
    Daniël
    The Sonnet G3 cards of various types (be it the NuBus, PCI or L2 cards) do work with the G4 swapped in, with the Sonnet extension then correctly detecting it as a "Sonnet G4" card. You do however need to lower the core voltage (750s generally run above 2V, the 7400 needs 1.8V), and just to be sure: You can only use the 7400 due to the cache voltage, the 7410 wouldn't work.
    did an onboard RAM upgrade on my IIsi not too long ago, swapped out the 128KB chips for 512KB chips and now my IIsi has 4MB of 70ns onboard memory. yes it will likely make it slower, but i felt like it, also i know i am not the first one to do this lol
    M
    max1zzz
    Nee to have a look if I have any assembled, if not I still have loads of blank PCB's and components, drop me a PM :)
    finkmac
    finkmac
    why an sca adapter over a nice SD adapter? those disks are rather loud and hot...

    actually i ripped one out of my iisi. silly thing!
    alectrona2988
    alectrona2988
    i already have a lot of SCA disks around from when my high school tech teacher was getting rid of them and i'd like to put them to good use. sure they take up more power, they scream bloody murder, and they run hotter than the sun (and i already know this)... but i have a lot of them and i need to put them to use.
    has anyone tried to use a manual inject floppy drive on a mac that takes auto drives?
    Phipli
    Phipli
    Puts a little bit of silicone grease in the gearbox? Might help.
    alectrona2988
    alectrona2988
    did that, still noisy. like something's grinding, even though the gears are still perfectly fine. i think the motor is worn out??
    Phipli
    Phipli
    If it is the actual motor it might be contamination. Have you put some machine oil on the motor bearings? Can't remember if you can get to them.

    Does it make the noise when you run the motor not inside the floppy drive? Unscrew it and lift it out, but leave it plugged in. It should run continuously when you eject I think.
    So I own a IIsi now. Power supply is unsurprisingly dead, and I am also interested in overclocking. How far could one get with clock chipping on a IIsi? Anyone ever got to 30MHz before?
    • Like
    Reactions: Snial
    JC8080
    JC8080
    I think I've seen posts of people going up to 27.5mhz and starting to have problems. Mine is overclocked to 25mhz with no problems. I have never read of people having problems at 25mhz, though I'm sure it has happened. Generally the stock 20mhz CPUs don't have a problem at 25mhz.
    Phipli
    Phipli
    It might not be the CPU that is struggling at 27.5 and above, it is more likely the software timings for hardware. If you speed up an early Mac that is not designed for it, you break timings for critical hardware.
    alectrona2988
    alectrona2988
    I'm going for 25; I just ordered a 50mhz oscillator.
    Does anyone here have BGA soldering/reballing skills? Want to have a PowerPC G4/7400 transplanted onto an old G3/233 processor card from a Rev B iMac.
    We can rebuild her. We have the technology. We can make her better than she was. Better, stronger??? faster... I guess? God, this is hopeless... :^)
  • Loading…
  • Loading…
  • Loading…
Top