TheMacGuy
Well-known member
Found a lot on eBay of 2 SCSI HDDs, an Apple HDI-20 Floppy drive and a spare case for another Apple HDI-20 Floppy Drive. Won it, and received it today. The 2 HDDs were identical, both 4.29GB Seagate Barracudas, one has a "wide" SCSI interface (never seen before, will post picture later) and the other, a "narrow" SCSI interface AKA 50-pin SCSI. Both drives are also apx. 2 inches in height. The 50-pin won't fire up. I have diagnosed the problem on the board as I took the "wide" SCSI board and put it on the untested drive, it fired right up.
The Floppy Drive is going to go untested, as I have no way to test it. I might sell the extra casing, but I want to make sure the other one is in fully working order before I do. It has the cable and everything.
The Floppy Drive is going to go untested, as I have no way to test it. I might sell the extra casing, but I want to make sure the other one is in fully working order before I do. It has the cable and everything.