uniserver
Well-known member
after using a heat gun and I/C's from a 6500 board,,, i finally got HAP's Prototype TAM board working.
i am just curious because i also soldered on the rom chips from the 6500 and obviously it says in profiler that its a powerPC 603ev, 250mhz Power Macintosh 6500 series.
I am wondering if that is what a TAM normally says?
because the ROM simm that came in this proto tam board does not work. the soldered on rom's from the other board do work.
Thanks
Charles
i am just curious because i also soldered on the rom chips from the 6500 and obviously it says in profiler that its a powerPC 603ev, 250mhz Power Macintosh 6500 series.
I am wondering if that is what a TAM normally says?
because the ROM simm that came in this proto tam board does not work. the soldered on rom's from the other board do work.
Thanks
Charles