Christopher
Well-known member
Hey, my iMac G4 gave up the ghost for some reason and I'm not about to fix it right now so I'm putting the 80GB drive inside my quicksilver which already has 2 hard drives. I thought I'd throw it in the zip drive slow since it's ATA. I set the hard drive to slave since the dvd drive is master. All is well? Not quite, it cancels out both devices on that bus, so I don't have use of my dvd drive or the 3rd drive I put in. What gives?
It's a 733MHz quicksilver with 1.25GB of ram running tiger. Other two drives are seagate somethings, but this drive is a Seagate Barracuda IV, if that means anything.
It's a 733MHz quicksilver with 1.25GB of ram running tiger. Other two drives are seagate somethings, but this drive is a Seagate Barracuda IV, if that means anything.