MacUp72
Well-known member
today I got a nice working Pismo 400 and a 3400, but this doesnt start at all.
I already removed the PRAM battery, tried reseating everything, starting only with necessary hardware, but it doesnt even try to chime.
I only can hear a tiny Pop from the speakers. Power adapter is working, the battery looks very good, no corrosion anywhere.
Maybe the power connector on the board is cracked/bad, at the moment I try to remove the logic board to check for cracks or bad solder there.
but I cant get it out of the chassis...
the manual is a joke ( with modern powerbooks this is easier)
I already removed the PRAM battery, tried reseating everything, starting only with necessary hardware, but it doesnt even try to chime.
I only can hear a tiny Pop from the speakers. Power adapter is working, the battery looks very good, no corrosion anywhere.
Maybe the power connector on the board is cracked/bad, at the moment I try to remove the logic board to check for cracks or bad solder there.
but I cant get it out of the chassis...
the manual is a joke ( with modern powerbooks this is easier)