Trash80toHP_Mini
NIGHT STALKER
HRMMM? Another PDF hunt coming up. Depending on what that one additional pin is up to, 750CX might just work. 6mm more in package size shouldn't matter, assuming the BGA arrangement remains the same. Even if they spread it out, putting an opening in the center it should still fit on a CQFP adapter PCB.
Gotta take a look at the 2300c board to see if the adapter could hang over the edge of the pads a bit for bus multiplier resistors, caps and the like. Hunting down the multiplier components on the logic board would save that space. Gotta do that anyway for my 200MHz 603e (might be 180MHz, don't recall offhand) eventually anyway for that long neglected project.
Gotta take a look at the 2300c board to see if the adapter could hang over the edge of the pads a bit for bus multiplier resistors, caps and the like. Hunting down the multiplier components on the logic board would save that space. Gotta do that anyway for my 200MHz 603e (might be 180MHz, don't recall offhand) eventually anyway for that long neglected project.