Trash80toHP_Mini
NIGHT STALKER
Well, I got a lot of cleaning, organizing and re-stuffing of a few toys back into their respective project boxen . . .
. . . so it was time to drag other stuff out and start the cycle all over again! [] ]'>
I'm in wait for it to get hereto try it mode because I ordered a tiny-bitty-bit-o-Win98 stuff for this project on payday.In celebration of the announcement that we'd be getting our quarterly bonus again, I figured I'd spend a little bit of it ahead of time for just for safekeeping . . .
. . . wouldn't wanna wind up wasting it all on food, shelter, gas or the like!
Anyhoo, I figured I'd try to fire up what I'd identified as a Kelut board and got it all put together nice and neat in the case from which I'd torn that crazy RadySys ENDURA EM945G P4 beast with the 2U cooling tower for want of a monster PSU. When I looked for the DIMMs for it I realized they were the two I'd tried to set fire to by halfway installing them in the Intel board . . . FEH! [!] !]'>
I figured, what the heck and tried it anyway . . . it's silent and does nothing . . .
. . . but just once I got it to do the Award BIOS POST test smelly cat song:
Repeating (endless loop) - Memory error - Check for improperly seated or missing memory.
According to the 18 page User Manual, I've brazed a MaxMem config:
Are PC3200 & PC2700 1GB DDR400 really the same, compatible or just plain wrong for the Kelut board?
All is not lost, Dimetrodon (Kelut) is coming out of the case, back into its anti-static bag, back in the MoBo box and it's AtomicNetTop playtime! [] ]'>
. . . so it was time to drag other stuff out and start the cycle all over again! [] ]'>
I'm in wait for it to get hereto try it mode because I ordered a tiny-bitty-bit-o-Win98 stuff for this project on payday.In celebration of the announcement that we'd be getting our quarterly bonus again, I figured I'd spend a little bit of it ahead of time for just for safekeeping . . .
. . . wouldn't wanna wind up wasting it all on food, shelter, gas or the like!
Anyhoo, I figured I'd try to fire up what I'd identified as a Kelut board and got it all put together nice and neat in the case from which I'd torn that crazy RadySys ENDURA EM945G P4 beast with the 2U cooling tower for want of a monster PSU. When I looked for the DIMMs for it I realized they were the two I'd tried to set fire to by halfway installing them in the Intel board . . . FEH! [!] !]'>
I figured, what the heck and tried it anyway . . . it's silent and does nothing . . .
. . . but just once I got it to do the Award BIOS POST test smelly cat song:
Repeating (endless loop) - Memory error - Check for improperly seated or missing memory.
According to the 18 page User Manual, I've brazed a MaxMem config:
I'm not going to find this in any of may Macs, am I? Gotta head to the TP or cough up a few more PaPal $imoleon$2 x 184-pin DDR DIMM sockets support up to maximum 2GB unbuffered PC2700/2100 non-ECC DDR SDRAM memory
Are PC3200 & PC2700 1GB DDR400 really the same, compatible or just plain wrong for the Kelut board?
All is not lost, Dimetrodon (Kelut) is coming out of the case, back into its anti-static bag, back in the MoBo box and it's AtomicNetTop playtime! [] ]'>