My 190 is in good shape and boots perfectly, but has a few problems. One is a main battery that cracked and leaked. The machine will likely never run on battery power again, but that's not a big issue. The big issue now is that it's fallen victim to "SpindlerPlastic" syndrome and the plastic on the lower right side of the screen is separating badly. From what I understand gluing it back together isn't a workable option, so at this point I'm trying to source replacement plastics for the machine. I've found plastics from a 190cs, but I'm not sure about the screen size. Did the cs model have a bigger screen than the standard 190? And would I be better off just sourcing a whole parts machine and transplanting its plastics and screen as one unit?