I have one of each of these super drives-- UJ-815-C, UJ-825-C. One's from a Powerbook G4, and the other from a G5. I also have a 50 to 40 pin adapter.
I'm guessing either one would work, but I read that these drives are set to master and you need to set the hard drive to slave.
I read somewhere that if you remove pin 28 on the IDE interface for the superdrive that will allow cable select to set it as slave.
Has anyone done this?
I'm guessing either one would work, but I read that these drives are set to master and you need to set the hard drive to slave.
I read somewhere that if you remove pin 28 on the IDE interface for the superdrive that will allow cable select to set it as slave.
Has anyone done this?