avadondragon
Well-known member
So quite a while back I recapped a powerbook 160's screen and the results weren't so great. I've done many successful recap jobs (including powerbook screen recaps) in the past so I felt pretty good about the work. Just recently I decided to get it off the self and check my work under the microscope and see if there were any bad solder joints or anything but I didn't see anything unusual. It's presenting vertical lines through the top half of the screen. The bottom half looks perfect. Anyone have an idea what could be wrong. I don't actually remember what the state of the screen was before the recap. I think it just had severe ghosting.