chris
Well-known member
Well, fixed the slowness problem, but now when I try to install a new 400mhz g3 upgrade card, I get a bong but no display.
Ram is confirmed good, as is video. CUDA reset and PRAM reset both tried. Different jumper settings tried.
It works when I swap the old proc back in, with the exception of one thing: the hard drive. This thing for some reason powers up, then power to it is cut off abruptly for no apparent reason. Powers up again, shuts off. Ad infinitum.
Anybody got any idea how to fix either/both of these problems? Obviously I'd like both fixed, but preference is of course given to the hard drive thing (can't boot without it)
Ram is confirmed good, as is video. CUDA reset and PRAM reset both tried. Different jumper settings tried.
It works when I swap the old proc back in, with the exception of one thing: the hard drive. This thing for some reason powers up, then power to it is cut off abruptly for no apparent reason. Powers up again, shuts off. Ad infinitum.
Anybody got any idea how to fix either/both of these problems? Obviously I'd like both fixed, but preference is of course given to the hard drive thing (can't boot without it)
Last edited by a moderator: