Search results

Hi, I have a Lisa 2/10 , ROM H/88, that has been repaired with a lot of help from 68kmla.org. Its sold in Sweden with a swedish keyboard. There is Lisa OS 3.1 on the harddrive and its booting from the HD. The CRT has been burned in the screen with the previous OS thats obviously Mac OS in...

I have a Lisa 2/10 H/88 that was defect when I bought it 10 years ago. There was a problem with the static RAM but with excellent help from this forum ( stepleton and mactjaap) its now working, except for the widget harddrive. Now its time to try to repaire the harddrive. When starting I get the...

I have a LISA 2/10, (H/88) that has been working good. The harddrive is dead but it has worked with the floppy drive and booting from that. Recently its not working. When I put it on the screen is white but no click, no sound , no error sound. Just a white screen. The lamp in the on button is...

I have an Apple III,  A3S1 no 57901  motherboard  820-0043-00E  5V memory board. When I got it the power supply was dead. I´m trying to restore it but I have tried with ATX PSU unit that delivers -12, -5, +5 and +12V. Put in a new keyboard lamp. When I turn it on there no sound, no video, no...

I got this Mac IIsi a year ago. Removed the battery and all caps then. Didn´t test it before that. Now I have started to get it working.  All caps are replaced with tantalums, new axial caps. When I turn it on, the fan is working, HD is spinning. The screen is white with no mouse pointer. Only a...

This portable did work some months ago. The harddrive was dead but it was working fine with the floppy drive. Recently when I tested it it was not working, Sad Mac and error code 00000014  0000CD36. Started to recap it. A lot of dirt under the capacitors. Especialy C25-C28 was very dirty...

I´m working with a 512k that was bought as defect. The 512k is now working but the keyboard is dead. Mouse is working. Noticed that the keyboard cable that was delivered with the 512k was not a keyboard cable but instead a telephone cable. se Picture Larry Pina ( Macintosh Repair &amp...

Recently I got a SE/30 that was not working. Simasimac and no sound. After recapping and cleaning its working almost. The internal SCSI drive was not detected, the fuse F3 was blown. After replacing it the termpwr on the SCSI port is 4.7 V. When I start the SE/30 its working perfect, booting...

Recently I bought an Apple IIGS from US. I live in Europe and want to convert the power supply from 115 volts to 230 volts if its possible. The PSU is Astec model AA13581 , Apple no 699-0126. There is no switch inside the PSU for different voltage. Has anybody managed in converting this PSU to...

Hi, Recently I got an Mac SE/30 that was not working. When turning on the Mac the sound is Ok and the hardrive is spinning but no video. The screen is black. A RasterOps graphic card was installed ( RasterOps 264/SE30) when I got it. When I attach an external monitor to RasterOps its working...

Hello, I´m trying to restore a 512K but it will not boot. When I start the 512K it shows a diskette with a questionmark. I use a 400k diskette with system disk 2.0 and when its entered in the diskdrive it will not boot. The question mark disappear but its not booting. The diskette is working...

Hello this is my first post in this excellent forum. I have started to repair some old Macintosh thats not working. I have had enormous help with information from this forum regarding how to recap a Mac SE/30 in the best way. I managed to repair a Mac SE/30 with simasimac and vertical black...