• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Calling 540c owners - photos of interconnect to display cable

Hey all,

Last year I bought a 540 on ebay, with a display damaged from vinegar syndrome. I bought a replacement 540c display, (thinking I may as well upgrade to color, as well as 540s being a bit rarer than the other 5xx models). I then realized that the interconnect to display cable must match the display. I bought a "SHARP COLOR FSTN" cable. I then did some research and once it arrived read this thread and realized that I actually needed a "SHARP COLOR TFT" cable. Looking at the monochrome and the color FSTN cables, there are only a few differences. My thinking goes that if I had photos of a "TFT" cable I might be able to convert between the two. If anyone is opening their 540c display anyway, could you please take photos of the cable?

Thanks
SparrowRat
 
I did see that thread and the page on MacDat. The thread has a far away and low-resolution photo of one side of the cable (and every connection on that side looks the same between the cables) and the MacDat page has no photos and is for the panels themselves anyway.
 
I have the sharp screen. But not sure when I will get around to opening the lid again. Will definitely take some pictures next time I am in there.
 
@SparrowRat here ya go.. (click to zoom in)

Side 1

IMG_7810.JPG

IMG_7813.JPG

IMG_7815.JPG

IMG_7816.JPG

IMG_7817.JPG

Side 2

IMG_7818.JPG

IMG_7819.JPG

IMG_7820.JPG

IMG_7821.JPG

IMG_7822.JPG

IMG_7823.JPG

The individual wiring is hard to see from a picture (actually can't see most of it myself with this in person) so not sure how useful this will be for you but hope this helps.
 
Back
Top