james_w
Well-known member
I just got a RasterOps 24L (ROM 1.1) from eBay, and the seller claimed it as working (removed from a IIvx), and when installed in my Quadra 700 (running 7.5.5) it freezes part way through booting - just after the welcome to macintosh screen.
I've tried these things with no luck:
• installing RasterOps drivers (3.3)
• zapping the PRAM
• booting with extensions off
I've not yet tested it in another Mac - I could try my IIci.
A visible inspection of the board doesn't reveal any obvious hardware issues.
Anyone got any ideas?
I've tried these things with no luck:
• installing RasterOps drivers (3.3)
• zapping the PRAM
• booting with extensions off
I've not yet tested it in another Mac - I could try my IIci.
A visible inspection of the board doesn't reveal any obvious hardware issues.
Anyone got any ideas?