imactheknife
Well-known member
Have a 4mb module from a 140-170. If the ram was removed will it work on a 180 memory expansion card with empty slots? I am guessing not, but curious just in case.
-
Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.
Powerbook memory question
- Thread starter imactheknife
- Start date
avadondragon
Well-known member
I'm not sure if I'm interpreting your wording correctly. Are you wanting to transplant chips from one memory card to another? That is certainly possible to do and can work.
imactheknife
Well-known member
Hi there, yes thats what i am saying. Sorry for confusion. Only issue, is on the powerbook 180 expansion one chip says 9337 658511ltt-85. On other side of board it says 9335 658512lfp-85. On the actual logic board it says 9327 658512ltt-85 on both sides of board. So why does expansion have the lfp chip on one side? It is thicker too. I added pictures of both sides of logic board and both sides of expansion. Thanks for the help
Attachments
Siliconinsider
Well-known member
Yes it will work. The thick chips can only go on the bottom as there's no room to put them on the top. Mixing package types is perfectly fine.
