digitalrampage
Well-known member
Hi Everyone,
My Powerbook 270c wasn't working and ticking, so I cracked it open and saw that the caps were leaking. Removed all the SMD caps, cleaned and replaced with Tantalum.
There was no change. So I washed the whole board and the unit still is not powering up with this buzzing from the cap area.
Any suggestions on possible other causes?
My Powerbook 270c wasn't working and ticking, so I cracked it open and saw that the caps were leaking. Removed all the SMD caps, cleaned and replaced with Tantalum.
There was no change. So I washed the whole board and the unit still is not powering up with this buzzing from the cap area.
Any suggestions on possible other causes?