jamesmilne
Active member
The first boards have arrived, and my board wizard friend Mark, who designed it, has assembled the first prototype!
We’ll likely simplify the board further. No need for a socketed EPROM if we can program the firmware via the computer, for example, allowing us to use a smaller SMD EPROM.
He is in London, Ontario and I’m in London, England, so once he has finished his initial tests he’ll send it over to me and I can get started on the driver.
We’ll likely simplify the board further. No need for a socketed EPROM if we can program the firmware via the computer, for example, allowing us to use a smaller SMD EPROM.
He is in London, Ontario and I’m in London, England, so once he has finished his initial tests he’ll send it over to me and I can get started on the driver.
Last edited by a moderator: