9166188
Well-known member
Just replaced the 2 big caps of 220uF as well. So, all caps onboard are new now. No luck still.
I did connectivity test between each leg of the caps to a nearby joint by following lines onboard. Is this good enough?
Before throwing my towel, I gave another good wash to the board. Almost no residue came out. It's now very hygienic.
But the problem must be something else in the logic board. But I don't know exactly what can be done next.
I did connectivity test between each leg of the caps to a nearby joint by following lines onboard. Is this good enough?
Before throwing my towel, I gave another good wash to the board. Almost no residue came out. It's now very hygienic.
But the problem must be something else in the logic board. But I don't know exactly what can be done next.
Last edited by a moderator: