CC_333
Well-known member
Hi,
The two electrolytic capacitors on my new-to-me Mac IIfx fell off while I was cleaning it of electrolyte, and I replaced one of them, but one of the pads for capacitor C24 is pretty much destroyed (the traces are still intact as far as I can tell).
I just wanted to know if anyone has documented which capacitors connect to what and what they are for (in the same way that the SE/30 is documented. For example, Mk.558's charts here: http://68kmla.org/forums/viewtopic.php?f=7&t=17775) so I can rework the now-missing pad.
I haven't gotten to use it yet (it's waiting for a video card). However, it seems to be in working order once it's on (it chimes, and attempts to boot from its disk drive), so I think this is the only problem.
Thank you!
c
The two electrolytic capacitors on my new-to-me Mac IIfx fell off while I was cleaning it of electrolyte, and I replaced one of them, but one of the pads for capacitor C24 is pretty much destroyed (the traces are still intact as far as I can tell).
I just wanted to know if anyone has documented which capacitors connect to what and what they are for (in the same way that the SE/30 is documented. For example, Mk.558's charts here: http://68kmla.org/forums/viewtopic.php?f=7&t=17775) so I can rework the now-missing pad.
I haven't gotten to use it yet (it's waiting for a video card). However, it seems to be in working order once it's on (it chimes, and attempts to boot from its disk drive), so I think this is the only problem.
Thank you!
c