LaPorta
Well-known member
So I got this fan speed control unit on Amazon, and it looks like it is working well so far. Installed it last night: just have to fine-tune it as for what speed fr what temp. Had it set too low last night and the machine shut down…but this was also with the cover off so it wasn’t able to draw in air the way it should, either. Makes things WAY quieter. Planning on replacing the 5.25” HD with a SCSI2SD 5.2 soon too, so it will be a new game as far as sound level!
Ill post some photos soon of the module and routing. Instead of hacking up wires, I just used some 20 gauge wire I had and soldered it to the fan + and - terminals under the PSU so as not to disturb the original header.
Ill post some photos soon of the module and routing. Instead of hacking up wires, I just used some 20 gauge wire I had and soldered it to the fan + and - terminals under the PSU so as not to disturb the original header.