I'm contemplating a small project that would allow me to send/receive serial communication between my SE/30 and an external microcontroller unit (via the serial/modem port). I've written a dozen or so embedded C++ apps in the past that include custom MCU to MCU serial communication protocols, so I've got that side of it thoroughly covered. The new territory for me would be developing a C++ app for 68k.
I've installed copies of the Macintosh Programmer's workshop, and Codewarrior 5 Pro. Between the two, Code Warrior seems to be a clear winner in terms of a modern-ish IDE. From there I installed Apple's "MacApp" framework and the Metroworks "PowerPlant" framework. I'm steadily going through the documentation and tutorials for both of those, but unfortunately I have yet to uncover an example or source code for a 68k application that engages the Mac's serial/modem port.
Can anyone recall seeing and frameworks, libraries, tutorials or anything open source that might show some example code for working with a classic Mac's modem port? Thanks in advance!
I've installed copies of the Macintosh Programmer's workshop, and Codewarrior 5 Pro. Between the two, Code Warrior seems to be a clear winner in terms of a modern-ish IDE. From there I installed Apple's "MacApp" framework and the Metroworks "PowerPlant" framework. I'm steadily going through the documentation and tutorials for both of those, but unfortunately I have yet to uncover an example or source code for a 68k application that engages the Mac's serial/modem port.
Can anyone recall seeing and frameworks, libraries, tutorials or anything open source that might show some example code for working with a classic Mac's modem port? Thanks in advance!