babelfisher
New member
I recently decided to try and make my own scsi2sd v4.2 from the project shared on github. I've managed to build 2 boards and flash a hex file to the cypress chip and then upgrade the firmware.
It's at this stage I've come unstuck. I have not been able to get the board to work on a compact mac, having tried several firmware versions and different combinations of both V3 and V4 versions of the software provided on github.
Both boards fail the self test on the configuration utility and I've now come to a dead end on where to proceed from here.
I was wondering if anyone could point me towards what might be an obvious problem or suggest a way to further troubleshoot the problem.
Thanks
It's at this stage I've come unstuck. I have not been able to get the board to work on a compact mac, having tried several firmware versions and different combinations of both V3 and V4 versions of the software provided on github.
Both boards fail the self test on the configuration utility and I've now come to a dead end on where to proceed from here.
I was wondering if anyone could point me towards what might be an obvious problem or suggest a way to further troubleshoot the problem.
Thanks