TashTalk USB

[NJRoadfan]

09:00:07:FF:FF:FF is the default broadcast address for EtherTalk Phase 2 and it could change depending on zone. Only Phase 1 used FF:FF:FF:FF:FF:FF. Network "0" should only appear on broadcast packets (ie: 0.255), otherwise its not valid. The ImageWriter LocalTalk card has a few NBP bugs too, which makes things fun.

 

[iigs123]

Hard-coding a destination network to '0' in the lookup packet looks to be a fix. Netatalk shows up in the results now. It is too early to make noise with the ImageWriter so I'll test that later. Now to consider how to handle such workarounds...