Macintosh II, Logic Board 820-0163-03 630-0140 SIM SIMM Memory Slot Connecter Replacements?

[MAC007]

Hi all, this is my first post. I just joined.

I am looking to replace the SIM SIMM Memory slots connectors on this 820-0163-03 Logic Board. Someone broke them and I really want to restore this Logic Board instead of turning it into a donor.

I found this site and I think this is what I need.

Dual 30 pin SIMM Socket Angled: Phoenix Enterprises -PE- Connectors IC Sockets Tools Cable Wire

MEMORY SOCKET SIMM-30X22X30 PIN DUAL ROWSIMM MODULE SOCKETLOW PROFILE: ANGLED 22 DEGREEMETAL LATCHESGOLD PLATED CONTACTSTIN PLATED TAILSTHROUGH HOLE PCB MOUNTAlso Available: 30 pin SIMM Socket Metal Latches HWS504030 pin SIMM Socket Plastic Latches HWS4323Dual 30 pin SIMM Socket Vertical HWS9594

www.peconnectors.com

Can anyone confirm for me or recommend where to get replacement slots/connectors.

Pictures attached are the Logic Board I will be restoring. I hope I can source new slots/connectors rather them pulling them from another Logic Board.

 

[ObeyDaleks]

Those should work. I used them on a different mac (LCII?) and they were a perfect replacement. I believe all Macs, including the Mac II, have the same spacing on their dual 30 pin slots. PE is probably the best vendor for these parts.

 

[zigzagjoe]

Keep in mind those are angled connectors so you would need to replace all simm slots. Also, verify the spacing between rows is correct. There are dual slot sockets out there which have different spacing from what the Macs used.

 

[ObeyDaleks]

Honestly, even if for some reason the spacing is wrong, I would just cut them apart. The single slots from PE are much more expensive.