Macintosh 128 Error

Hi,

No translation needed - you likely have failed 4164 RAM, more than one chip, I would recommend desoldering all, replace with DIP16 sockets and new tested 4164 chips. Having just done this, it is not a fun job at all to do, you will need time and good soldering skills to get there.

JB
 
Bonjour et Merci beaucoup. Comment vérifier celles défectueuses svp ?
Ça peut pas être juste une instabilité de voltage ? Merci encore
 
It points to a faulty chip in one of the banks (F9) going by the error code. You can "piggyback" a known good 4164 over the suspect faulty chip to test as troubleshooting measure. However there are likely more chips at fault or more to come very soon.

Voltage instability - unlikely

More info here on the code to decipher:

 
Back
Top