Firmwares for Fujinet for Apple ][ manufactured by Masteries

[masteries]

Greetings,


Here I will upload and maintain all the firmwares oriented
and tested for the Fujinet for Apple ][ model I manufacture:



=>Firmwares suitable for REV A hardware revision (REV A is the first version of the FujiApple),
these are the same as for REV B hardware revision:


Firmware v1.1 : https://drive.google.com/file/d/1OtIMIUGgZYRouATKP3oUh3WJIn_8th_a/view?usp=sharing
Firmware v1.0 : https://drive.google.com/file/d/16UMjHlqC_aNxAdWib7JAEvFjyfrbvfUv/view?usp=sharing



=>Firmwares suitable for upgrade REV A hardware revision
(the upgrade can be identified easily, your unit will have REV A marked at back,
but there is also a copper wire soldered between the green board and one pin of the SD card holder):


Firmware v1.1 : https://drive.google.com/file/d/1V6FNA9Sv6qn5T3kdlYBX_zAwcGgFGrvh/view?usp=sharing
Firmware v0.5.77bfa009 : https://drive.google.com/file/d/1elNx2yRY1EcVt_S4ILmVQG2ytTgAocNn/view?usp=sharing



=>Firmwares suitable for REV B hardware revision (REV B is the latest hardware revision),
(these firmwares have the checking for the lack of one component disabled, due to this checking
is not compatible with all available versions of AHCT125 ic ) :



Firmware v1.1 : https://drive.google.com/file/d/1OtIMIUGgZYRouATKP3oUh3WJIn_8th_a/view?usp=sharing
Firmware v1.0 : https://drive.google.com/file/d/16UMjHlqC_aNxAdWib7JAEvFjyfrbvfUv/view?usp=sharing

 

[masteries]

Update with Firmware v1.2,
compiled for all Fujinet for Apple ][ hardware revisions



=>Firmware v1.2 suitable for REV A hardware revision (REV A is the first version of the FujiApple),
these are the same as for REV B hardware revision:

Firmware v1.2: https://drive.google.com/file/d/1S16R1CJH-lCQrGdnq5kOMbn5snws0lvb/view?usp=drive_link





=>Firmwares suitable for upgrade REV A hardware revision
(the upgrade can be identified easily, your unit will have REV A marked at back,
but there is also a copper wire soldered between the green board and one pin of the SD card holder):

Firmware v1.2: https://drive.google.com/file/d/1ffl7-1SCgafa0xo_55lc_jyOfQGvKhcX/view?usp=drive_link




=>Firmwares suitable for REV B hardware revision (REV B is the latest hardware revision),
(these firmwares have the checking for the lack of one component disabled,
due to this checking is not compatible with all available versions of AHCT125 ic ) :

Firmware v1.2:

v1.2 Rev A y B_NOREV1CHECK.zip

drive.google.com

 

[masteries]

Update, firmware v1.3:

Firmwares for Fujinet for Apple ][ manufactured by Masteries

Greetings, Here I will upload and maintain all the firmwares oriented and tested for the Fujinet for Apple ][ model I manufacture: Suitable for all units, from the older ones, to most recent! =>Firmwares suitable for REV A hardware revision (REV A is the first version of the FujiApple), these ...

forums.atariage.com

 

[slomacuser]

Runs fine on IIc but IIe cant connect to wi fi

 

[ppuskari]

While not the official firmware release I can offer to you those with the REVB Masteries devices this firmware file which you can deploy to your devices through the newly updated fujinet web flash utility.
This is from about 6 pm CDT 05/27/2024 Build..... Again it's only for the unmodified REV A or REV B Masteries (NOT for Upgraded Rev A) and it contains the new faster startup littlefs filesystem as well as the memory leak fix so you can play 5 Card Stud all day if you want!

Enjoy,

Petar Puskarich

 

[masteries]

While not the official firmware release I can offer to you those with the REVB Masteries devices this firmware file which you can deploy to your devices through the newly updated fujinet web flash utility.
This is from about 6 pm CDT 05/27/2024 Build..... Again it's only for the unmodified REV A or REV B Masteries (NOT for Upgraded Rev A) and it contains the new faster startup littlefs filesystem as well as the memory leak fix so you can play 5 Card Stud all day if you want!

Enjoy,

Petar Puskarich

Thanks a lot!