BlueSCSI does not boot Mac SE

[BobDaAggie]

So I have finally purchased and installed an internal BlueSCSI for my Mac SE. The BlueSCSI does not boot the Mac. I can boot it off of my external BlueSCSI and when I do the drives that are set up in the internal BlueSCSI do show up.

I swapped the SD cards around but nothing I did could get the Mac SE to boot off the BlueSCSI. I enabled debugging mode and have attached the log.

Any help would be greatly apreciated.

 

[shirsch]

Your log shows:

[4961ms] DBG Waiting for USB enumeration to enter Card Reader mode.
[6061ms] DBG Waiting for USB enumeration timed out after 1000ms.
[6061ms] DBG -- Try increasing 'USBMassStorageWaitPeriod' in the bluescsi.ini

Did you try what it suggested?