So I have finally purchased and installed an internal BlueSCSI for my Mac SE. The BlueSCSI does not boot the Mac. I can boot it off of my external BlueSCSI and when I do the drives that are set up in the internal BlueSCSI do show up.
I swapped the SD cards around but nothing I did could get the Mac SE to boot off the BlueSCSI. I enabled debugging mode and have attached the log.
Any help would be greatly apreciated.
I swapped the SD cards around but nothing I did could get the Mac SE to boot off the BlueSCSI. I enabled debugging mode and have attached the log.
Any help would be greatly apreciated.
