A thread for RackMacs

[Jockelill]

You might be able to squeeze any of the LC boards into a 10”. I looked at it for my LC630, but that board was just a tad too wide.

This is my 630 also
It’s lacking a front plate but is otherwise finished. Running the HD of an industrial CF card. And has an Ethernet card.

 

[olePigeon]

I completely dropped the ball and forgot to post the link to the pictures of my IIfx. Better late than never, I guess. Here they are:

Index of /nasaiifx

 

[Jockelill]

I completely dropped the ball and forgot to post the link to the pictures of my IIfx. Better late than never, I guess. Here they are:

Index of /nasaiifx

WOW! Just WOW! That is an incredible cool machine!!

 

[olePigeon]

If anyone is wondering, the screws for the top metal cover are quick release screws. Just a 1/2 turn and they pop up. Makes it easy to take off. The video card marked "bad" is actually good, it was repaired before being put back in. The repair is on the backside of the card. Likewise with the blown capacitor. I replaced that one myself.

The motherboard is otherwise a stock IIfx motherboard. The power supply is a bit different. Has that nifty large master switch on it.

 

[Jockelill]

Do you have some pictures of the rear of it? Just curious how they did with the Nubus slots huven they are reversed with PCI.

 

[olePigeon]

@Jockelill No additional pictures of the rear at the moment, but you can get the idea in the 1st picture. It's essentially just a metal version of the IIfx rear.

 

[cheesestraws]

I completely dropped the ball and forgot to post the link to the pictures of my IIfx. Better late than never, I guess. Here they are:

Yes! I'd forgotten about this but how nice to see it again. Worth it even if just for the enormously overengineered power switch in pic 5 if anyone is wondering.