M235i
Well-known member
I've been working with Apple's forgotten workhorse, the XServe G4. It's an orginal dual 1.0GHz with FW 400 and tray load drive.
However, I ran into the issue of the Ethernet port it giving up after about 20 minutes of running under any circumstances. I was able to secure an XServe G4 board, but it was for a 1.33GHz with slot load and FW800. My only concern is before I plug it in is the socket compatibility between the dual 1.00 and 1.33GHz processor boards. Would there be any incompatibilities? Or could it be plug and play from the start.
However, I ran into the issue of the Ethernet port it giving up after about 20 minutes of running under any circumstances. I was able to secure an XServe G4 board, but it was for a 1.33GHz with slot load and FW800. My only concern is before I plug it in is the socket compatibility between the dual 1.00 and 1.33GHz processor boards. Would there be any incompatibilities? Or could it be plug and play from the start.
