Turaiel
Member
I'm so close to being finished with my SE/30 restoration. Initially, it had the 1.44 MB floppy drive connected internally. After fighting with it for weeks, I pulled my 800k drive out of its external enclosure and installed that in place of the 1.44 MB. Now, when I insert a disk I'm prompted to initialize it. I thought maybe the cable was the issue, but I swapped it with a known-good one and the problem continued.
I know the drive works, and that the floppy disk is good, because everything works fine when I connect the drive with the cable from the external enclosure.
Any ideas on that?
I know the drive works, and that the floppy disk is good, because everything works fine when I connect the drive with the cable from the external enclosure.
Any ideas on that?