68krazy
Well-known member
Hey everyone,
I've got a fully-restored SE/30 that is giving me screen issues. It's the one from this thread: https://68kmla.org/forums/index.php?/topic/30045-full-recap-of-my-new-se30-with-many-pictures/
I've attached a video of the screen issue I'm having (can upload to YouTube if the attachment is an issue for you guys). The screen twitches intermittently. A nice sharp slap to the side of the machine makes it go away for a while.
Here's what has been done to the analog board so far:
-Full recap of all electrolytics
-C15 replaced with film capacitor
-Yoke connector resoldered (all old solder completely removed)
-Flyback resoldered (all old solder completely removed)
Not sure where to go from here. What other cold solder joints could cause this issue?
IMG_1303.MOV
I've got a fully-restored SE/30 that is giving me screen issues. It's the one from this thread: https://68kmla.org/forums/index.php?/topic/30045-full-recap-of-my-new-se30-with-many-pictures/
I've attached a video of the screen issue I'm having (can upload to YouTube if the attachment is an issue for you guys). The screen twitches intermittently. A nice sharp slap to the side of the machine makes it go away for a while.
Here's what has been done to the analog board so far:
-Full recap of all electrolytics
-C15 replaced with film capacitor
-Yoke connector resoldered (all old solder completely removed)
-Flyback resoldered (all old solder completely removed)
Not sure where to go from here. What other cold solder joints could cause this issue?
IMG_1303.MOV
Attachments
Last edited by a moderator: