Macintosh Portable non-backlit hopeful LCD repair adventure

[wymtb]

Are you using the original power supply? Recapped board? Recapped Power Supply if it is the original one?

 

[Sideburn]

A few years ago I had exactly the same experience. Got a spare screen in perfect conditions, after a few hours of use it started developing dead lines. Out of 3 screens I had, two are now dead, only one is still OK, bar for a few dead pixels...

We desperately need a reproduction lcd!

 

[Sideburn]

Are you using the original power supply? Recapped board? Recapped Power Supply if it is the original one?

All original but re-capped / repaired.

 

[Joopmac]

Any new insights on this?
It worked perfect yesterday
Today the line is or off or on
(Black line or “white” line)

 

[Sideburn]

Ahhh bummer... That happened to me after replacing / ruining / making worse the original one.. I ended up finding another that is so far all good except one pixel. I wish someone could figure out what exactly is going on here.. I don't think it is the carbon zebra stripe rubber connecting the lcd to the board and I don't think it is the driver chips either since I have tried swapping them out.

We really need a new reproduction lcd designed...

 

[Joopmac]

are the backlit M5126 less prone to this? i have two of these and luckily they are fine (knock on wood)
i tried fiddling with a screwdriver around the drivers, and i can make the stripe change colour from off- to on..
it's very strange indeed

so this is going to be a parts donor

 

[Sideburn]

I’d be surprised.

 

[Sideburn]

are the backlit M5126 less prone to this? i have two of these and luckily they are fine (knock on wood)
i tried fiddling with a screwdriver around the drivers, and i can make the stripe change colour from off- to on..
it's very strange indeed

so this is going to be a parts donor

I tried very hard to fix mine. What I did learn is aligning the glass in the frame is crucial and if not right it can lead you down the path of thinking lines are dead when they are not. But if they are dead then I don’t think there’s anything you can do about it unless we can figure out what really is going on.

 

[Joopmac]

They probably end all up being parts donors to make really nice and tight m5126’s

 

[Sideburn]

That’s probably it!