rushfan82
Well-known member
I am beginning the process of recapping the analog board on my 128k after the RIFA exploded, and was hoping to gain some knowledge because according the list of caps on this Google doc: https://docs.google.com/spreadsheets/d/132RwzC8HM5ask-BdY_31txErOCwJDSkz099GY2XLpE0/edit?usp=drivesdk
The caps used are different than what's on my board. The capacitance is the same, but the voltages on some, such as C1, is 25V on my board vs on the sheet it's 100v. Should I follow what's on my board? Or follow the sheet since a higher voltage capacitor shouldn't really make a difference, right? I've also ordered a new flyback transformer just in case.
The caps used are different than what's on my board. The capacitance is the same, but the voltages on some, such as C1, is 25V on my board vs on the sheet it's 100v. Should I follow what's on my board? Or follow the sheet since a higher voltage capacitor shouldn't really make a difference, right? I've also ordered a new flyback transformer just in case.