MinerAl
Well-known member
I found a bin of old parts (including the rest of my ZipCC, so I may get it back in running condition) and in it was a spare CC loom! Woohooo!
That means I just have to isolate the signals from leads: 8 (Video GND), 9 (Comp-Sync), 11 ( B) , 13 (G), 15 ®, 20, 24, 25 (IDs), and 28, 29, 30, & 31 (audio L, L-GND, R, & R-GND). It would be cool to make a little slide-in edge board, but I think I'll just carefully strip out those leads from the ribbon cable and be done with it.
I might actually have something working soon if I can get some time away from family over the Christmas break.
I still have some sanding, painting, and door fitting to do with the body, but except for the monitor connector that jt has, I have assembled all the internal parts.
That means I just have to isolate the signals from leads: 8 (Video GND), 9 (Comp-Sync), 11 ( B) , 13 (G), 15 ®, 20, 24, 25 (IDs), and 28, 29, 30, & 31 (audio L, L-GND, R, & R-GND). It would be cool to make a little slide-in edge board, but I think I'll just carefully strip out those leads from the ribbon cable and be done with it.
I might actually have something working soon if I can get some time away from family over the Christmas break.
I still have some sanding, painting, and door fitting to do with the body, but except for the monitor connector that jt has, I have assembled all the internal parts.