Hi everyone, I have been interested in giving solder paste a shot for a while, but have been able to get by with wire solder, and been put off by the cost and shelf life of the paste.
I bought a hot air station a few months ago for cap removal, and got plenty if good advice from the forum.
I would like to try using paste with the hot air station to assemble a 68060 to 68060 adapter as well as swap a couple chips on an se/30 I'm trying to bring back to life.
Do any of you more experienced guys have some advise to share on which paste to buy, how to store it for max life, and what it is most helpful for?
I bought a hot air station a few months ago for cap removal, and got plenty if good advice from the forum.
I would like to try using paste with the hot air station to assemble a 68060 to 68060 adapter as well as swap a couple chips on an se/30 I'm trying to bring back to life.
Do any of you more experienced guys have some advise to share on which paste to buy, how to store it for max life, and what it is most helpful for?