macintosh2002
Well-known member
Hello, I´ve some trouble with my Colour Classic, please let me explain. I bought this CC as not working, the seller said it won´t turn on. A few hours later when I was at home again, I tried it again and it chimed and was booting, perfect I thought. But it didn´t last long and it seems, that when I shut down the CC it won´t boot again immediately. The CC had to stay connected, it only turned on occasionally.
Then I recapped the logicboard and almost all caps from the analog board. Now it starts immediately after turning it on (switch on the back), no soft start from keyboard. It chimes loud and clear, green control light is shinging too, but the screen won´t turn on. I also tried swapping the logicboard with my second CC and there it works great, so the problem should be found on the analog board.
Of course, the SCSI hard drive also broke...
Did someone had a similar problem or a solution to get it up and running?
Then I recapped the logicboard and almost all caps from the analog board. Now it starts immediately after turning it on (switch on the back), no soft start from keyboard. It chimes loud and clear, green control light is shinging too, but the screen won´t turn on. I also tried swapping the logicboard with my second CC and there it works great, so the problem should be found on the analog board.
Of course, the SCSI hard drive also broke...
Did someone had a similar problem or a solution to get it up and running?