I have a classic here that gives me a checkerboard screen after power on when the memory expansion card is installed, with or without Simms installed. The jumper is even set approprietly. The memory board doesn't seem to be the issue either, I tested it in another classic.
I did recap the board, twice. Once with electrolytics and now with tantalums and no change.
Searched the board for open traces both with magnification and with the meter, also checked and tested vias, nothing open from what I can tell.
This board was acting flakey before the 're cap, sometimes working with the memory card, other times not. So I did the 're cap and now nothing at all. Any ideas?
I did recap the board, twice. Once with electrolytics and now with tantalums and no change.
Searched the board for open traces both with magnification and with the meter, also checked and tested vias, nothing open from what I can tell.
This board was acting flakey before the 're cap, sometimes working with the memory card, other times not. So I did the 're cap and now nothing at all. Any ideas?