This has not been a good month for me. First my poor cat Linus is hit and killed by a car last week, and now the Q950 I picked up from our dear Nuvision has died! This Quadra 950, a workhorse at Nuvision Graphics for who knows how many years, is now giving no signs of life, and I don't know why...
Hey all, I've recently started setting up a Quadra 950 with SCSI2SD. I have encountered an issue where connecting a CD-ROM drive causes the machine to SadMac on boot, sometimes showing a movable mouse cursor for a second beforehand. This occurs regardless if the CD drive is connected internally...
Macintosh Quadra 800 with PowerPC upgrade card
Macintosh IIsi with a blown Maxell bomb xx(
Macintosh LCII with some minor cap leakage
Macintosh Quadra 950 with 128MB of RAM
Macintosh Quadra 630CD with Comm. Slot Ethernet
2x PowerBook Duo (One with a cracked screen)
3x PowerBook Duo batteries...
I recently got involved in reverse engineering the power architecture of the Quadra 630, in order to do an ATX PSU conversion. One thing I noticed is the large differences in component values between models, and implementations. Now I am very interested in finding out what the differences are...
I recently started a Quadra 630 project, and one of the main project goals is to convert the internal floppy drive to external. Someone mentioned: "you could always plug in an external floppy", but (since the Q630 lacks a floppy port) I have not found any external floppy drives that would work...
This is an anchor thread for a Quadra 630 project I am starting, which will receive periodic updates as the project progresses.
The primary goal of this project is to build a custom, minimal vertical case for the Quadra 630 logic board. The case will not support internal expansion except for...
I was in the middle of using Disk Copy 6.3.3 to image a floppy, inserted a double sided disk and... Well, it didn't like the disk and rejected it, even though it was double sided.
When I tried again, this happened:
The system froze at that point. Notice how it says to insert "Macintosh HD"...
This is more a jury-rig than a hack, but still cool! I did not expect this to work. I have a RoDime R0652 pulled from a Mac SE that died one day. I decided I needed to see if it still worked. The only 68k Mac I own is a Quadra 630... so there's no opportunity for an internal connection there...
I'm curious what these (circled in red) are on my Quadra 630 Logic Board. I hadn't noticed them until I went to recap the board... There's 3 SMD components hanging off 3 pins, on two NEC chips. Any ideas?
What is one of the most important things to you, when setting up an old Pre-OSX Mac? Getting the system running at it's best, getting it on the internet, and upgrading it to hell and back!? Maybe! I can say for sure that most people are probably going to include filesharing in that list, and...
The Quadra/Performa 630 uses PATA... With a modified cable, is it capable of supporting two drives? (Master & Slave) From what I've seen, probably not, but...
Has anyone actually tried this?
I always knew Appleshare made the startup process a little longer, but how long is "normal"? On a semi-fresh install of OS 9.2.2 on a 1.6Ghz MDD, it's freakishly long (over 2 minutes)... Any reason?
I heard somewhere it could be caused by Appleshare looking to mount non-existent shares (that...
This is just to record my experience trying to get a Windows server to fileshare with an OS 9 client. Just in case someone makes the same google searches I did.
I'm running Windows 7 on the server, and Mac OS 9.2.2 on the Mac (G4 MDD). Some serverside software had to be run in an Ubuntu Virtual...
I want to cram a 10K RPM enterprise SCSI drive into a LaCie Joule HD external case to replace the dead drive inside.
Reference/backstory thread: https://68kmla.org/forums/index.php?/topic/25838-lacie-joule-730-hd-problems/
I know I need an 80-pin SCA-2 to 50-Pin adapter, but does anyone know...
I have a LaCie Joule 730 HD. It's an external SCSI hard drive with a Quantum Lightning 730s 2400 inside it.
It spins up and the electronics seem to work ok, but the drive itself does not seem to operate properly. I last got it working on a Macintosh SE about 6 years ago, but when I recently...
I'm going mad trying to do this with limited resources. I am seriously going to lose it if I can't get this working. I need to install System 7.5 on my Quadra 630, but it's proving to be nearly impossible. It currently has Mac OS 8.0 on a 500MB HDD, but I want to install System 7 on my bigger...