I have a 1999 iMac DV. It was working properly until recently. Two problems arose after I installed Shuriken, the fanmade update for 10.4. First, the shutdown dialog box does not show up on the screen (this cropped up after installing the modern/metro theme), so I switched to OS 9 to mitigate...
I recently thought about the DOS-compatible cards that were made for the quadras, centri (centrises?), Power Macs, and other Macs, and was wondering if there were any IBM/DOS-compatible cards made for the LC line of Macs. I haven't found any on eBay, but I know some exist for the Macintosh SE.
I have a Macintosh Performa 6214CD, and I was recently wondering, are there any processor upgrades or accelerators for it? I know there are some for other macs that go in the processor or cache slot, but my Performa has the ROM and cache on the same card.
A few months ago, I was trying to overclock my MDD (rev A from 2002) from 1.25GHz to 1.5GHz, so I could get DiscordPPC to run properly, but I accidentally overvolted the CPU card and killed the logic board. Can this logic board be saved or should I just buy a working one?
As i was looking at my LC III today, I found out there’s some unused pads for a ROM of an unknown capacity, then I remembered the rominator ii and Macintosh classic which both had bootable systems in rom that were accessed by pressing or holding keys on startup. Would that be possible to make on...
I have a 1.25GHz MDD dual CPU card from a rev a MDD from 2002 that I blew up due to over voltage. Does anyone have any spare 7455s or 7457s I can use to put on the card? Thanks in advance
I have a dual 1.25GHz MDD that I sent to someone on Reddit who overclocked it to 1.5GHz. They did not have the hardware necessary to test it, so I took a gamble (cuphead says double down, I say it’s better not to play), but when I pressed the power button, the light faded to black, there was no...
I had to remake my RaSCSI install because the SD card I was using died because of the heat generated in my Macintosh Classic, but I can't for the life of me figure out how to install the DaynaPORT drivers without a disk without it failing to recognize the digital disk and asking for the physical...
I'm lost on setting up my RaSCSI. I have the daynaport software installed, but I can't figure out how to set up the connection in MacTCP control panel. Does anyone know how to do this?
So I have a Macintosh classic and a Macintosh LC III, i Just put together my raSCSI and I’m trying to install the daynaport software and I don’t have any physical disks, what software can I run to install it without the disk? I have an img file and StuffIt expander 5.5 isn’t doing anything but...
I just bought and set up a RaSCSI for my Macintosh Classic, and I noticed it doesn't have any version of system 7.5 on it, or really any version past 7.0.1. I have a 7.5.3 image, but it's in a DSK format, and I read that it only accepts variants of the HDA format and CDR files and ISO images. Is...
I have a Macintosh Classic that had no hard drive, nor any evidence of any being in there (there was a terminator on the SCSI port on the board) and I'm buying a RaSCSI to put in there so I can not only boot the machine into something other than system 6 but also connect said machine to the...
I have a Macintosh LC III that I’m using an AppleDesign keyboard on along with the 1987 adb mouse. Sometimes, keys just don’t work on the keyboard, but when I unplug it and plug it back in, suddenly the mouse is slower than it was and the keyboard works fine. What’s going on with it? I’m running...
I was using my Macintosh Classic last night, and it was working, now this morning, it crashes with the Kingston RAM expansion installed, and with RAM populated in the slots, it throws up a simasimac, how do I fix these issues?