• Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.

Macintosh Classic power cable - Would an LC cable work?


Well-known member
I have a Macintosh Classic that had no hard drive, nor any evidence of any being in there (there was a terminator on the SCSI port on the board) and I'm buying a RaSCSI to put in there so I can not only boot the machine into something other than system 6 but also connect said machine to the internet. But there's one problem, no power cable and none online as far as I've looked. The only one I've found that is close is one for the Macintosh LC series machines. Mine appears to be the type B analog board with the 2x2 hard drive power connector. Would the LC cable work or is it pinned incorrectly such that it would fry anything connected to it?