Jump to content


  • Content Count

  • Joined

  • Last visited

About bushok

  • Birthday 09/01/1971

Profile Information

  • Gender
  • Location
    The Netherlands

Recent Profile Visitors

628 profile views
  1. Ok thank you @Dog Cow. I’d better put this quest for a working drive with the Plus to rest then. Thanks all for the tips and advice!
  2. Oh it was @Dog Cow actually about the cables and pins. Does a SCSi DB25 cable for the Plus have less pins? Do you have a picture for me that shows it?
  3. I've got some more clarity: 1. I found out that the Mac Plus also gives the fat white and black stripes when the SEAD80 drive is NOT turned on, but when the SCSI DB25-cable (non Apple) is in the back of the Plus. So @Gsbtom was right, it is the cable that is not ok for the Plus. Unfortunately I do not have an original Apple DB25 cable. I also do not have DB25 terminator, that could be a problem too. 2. @LaPorta hooked the SEAD80 up with my IIfx, with the DB25 (non Apple) SCSI cable I've got. The IIfx recognises the SEAD80, but won't mount it (see first pic). I've tried
  4. Thanks for all the input @jessenator @LaPorta and @Gsbtom, I will have a look into the cable
  5. Thank you for your tips @Gsbtom and @LaPorta, I will try them!
  6. Well the drive probably has ProDOS installed as I got it with a IIGS. So that will not work in the IIfx. I will test things tomorrow and let you know
  7. I do have a IIfx, I might give the drive a try on that monster
  8. I’ve never seen SCSI terminators for these old SCSI connectors (I know about the 80 pin terminators), do they exist? The cable is not Apple SCSI, true.
  9. It does work normally when booting from the floppy drive. I have never used a SCSI device before on the Plus (and don’t have any other then this) so I am not 100% sure this port is ok.
  10. Hi, I've got a Macintosh Plus and I want to hook it up with a SEAD80 hard disk drive. I think this drive is quite rare. This drive is manufactured by SEA Software Nederland (the Netherlands) in 1990. It probably has 80MB storage capacity and I got it some time ago with an Apple IIGS. I never got it to work with the IIGS, but probably the system on the drive is not suitable for my Plus. Question: my SEAD80 drive has got 2 SCSI ports (IN and OUT [Dutch: UIT]). I think I'll need to use OUT when connecting to the Plus right? When I do so, I have the hard drive b
  11. @gilles Thank you for pointing the 'crack' out. It is not a crack though But there WAS a crack in the adapting plastic 'cilinder' (from here on I will call it 'adapter') that connects the print roll rod to the stepper motor (see attached pics). At first I did not see it because it is black and tucked away in a shadowy place. @Franklinstein came with the right hint (see above), I glued the adapter with thick power glue to the print roll rod and after that dried, I glued it to the stepper motor. This is a risky business, you need to open up the printer and remove the circuit board a
  12. Thanks for all the replies! @gilles I don’t see cracks anywhere and don’t believe there are any. Could you point this out with an arrow or circle on the photo? The rubber rings on the print roll axis are ok. When I turn the knob of the print roll, the paper moves upwards/downwards. @Franklinstein I have to try this trial and error method you suggest. The axis of the stepper motor itself does move when unplugged. So it is not stuck. Surprisingly there are no gears whatsoever. The axis of the stepper motor just fits in the hollow axis of the print roll. No spe
  13. Hi, I've just brought my Apple SilenType printer back to life yesterday, hooked up on my Apple II Europlus. Amazing it still prints. There is just one problem: it won't move the print roll. So lines are printed on top of each other. I suspect a defective electric motor on the print roll rod. Does anybody here know what the problem could be?
  14. Crazy stuff. I put everything together and all is ok. Probably it was the connection of the long pins in the red socket after all. Relieved here! Thanks!
  15. Thanks for helping! I’ve removed the top and disassembled the keyboard. The long pins appear to Ben in the red socket. I’ve checked the alps too. They are alright, they always were. A friend of mine mails me and thinks the duplexer chip could be the problem. No idea what that means or where it is located though.
  • Create New...