Jump to content
  • Posts

    • I would think, that it is a problem with the rom. If you get no chime, then the access to the rom failed.  If you have access to a eprom burner you can burn a new rom. Rom copies can be found in the internet.  I own some classics but none had problem with the ram on the logic board.
    • Hey Jordi,   Yeah, with my 150s “Low Power AC Adapter” it works great now. I would give it a try if you have one spare.
    • Welcome Pierre   Have you tried the driver for the '030 Dove card here?   https://vintageapple.org/macdrivers/accel.shtml   If you get a change could you please post a pic of the accelerator - I think I've the same-ish card but having trouble identifying it   JB
    • Yes, afraid it isn't great due to the sync with the camera,but you can see the difference, especially when zoomed in. I'm really hoping it isn't the onboard RAM. I am also posting on the forum I moderate on, got some good suggestions just come in over here: https://www.exxoshost.co.uk/forum/viewtopic.php?f=18&t=3187&sid=f46145394e7703f29ea86e33807b48e1#top so I will look into those too.     Hopefully my other parts will be in soon too and I can get the optocoupler replaced as well.
    • Hi,    Luckily this one never had a leaky battery. Boots just fine, but never heard any sound from it. When I click play sound in System 7 Control Panel it crashes. Cleaned the board with IPA, especially around sound chip, put headphone jack back and forth. No progress. I am planning to recap the board, but I guess there's something else going wrong?      
×