Jump to content
  • Posts

    • I bought a new "white label" IDE/PATA drive to add to a Sawtooth G4 I am attempting to beef up.  Can someone relieve me from my woeful ignorance as to what the labels mean on this thing?  16 heads?  32GB clip?  I tried the cable select setting for both the "16 heads" diagram and the "32GB Clip" diagram, and the G4 wouldn't recognize the drive either time.  I know the G4's ATA bus works, I have had two HDs in there successfully, but I want to replace the one that is only 6GB.  Attached is a picture of the label on the drive.  Are there any settings I should ignore?  I've not seen "Forcing Dev1 present" before, what does that mean?
    • I bet it would’ve worked fine with a new CRT.  
    • From a 2013 thread about one of the other two Twiggy Macs:   @OldMacGuy - Sounds like a good first step will be to find someone (ideally) local with a Lisa 1, who should be able to read and back up your disk over a serial connection to a modern computer. I'd recommend pursuing a backup now before continuing to test your drive with that disk, so you don't lose any data or corrupt the disk during your testing!   As for the drive itself, there's been some good discussion about Twiggy servicing over at LisaList2 lately. Perhaps you'll find that useful at a starting point: https://lisalist2.com/index.php/topic,80.0.html   If the controller board on the drive is identical to the one used in a Lisa, I wonder if the whole drive could be hooked up to a Lisa 1 and "exercised" by BLU, which would give you an indication as to whether or not it's working properly. Obviously, you'd have to make *absolutely* sure everything was identical before attempting this...      
    • I didn't try these tips, but I will keep them on file for future reference.  I ended up doing a clean install of the operating system and removing AfterDark.  As far as I can tell the problem has been solved.  The user is no longer experiencing crashes and error messages.  The only thing he currently complains about is the loss of his screensaver.
    • I saw one with a bust in screen and pink paint over it in a recylce center before