Jump to content

vilasaliv

6502
  • Content Count

    26
  • Joined

  • Last visited

About vilasaliv

  • Birthday 05/23/1975

Profile Information

  • Gender
    Male
  • Location
    Portugal
  • Interests
    LC III, LC 475, SE/30, g4 AGP, Were to recap in Portugal?

Recent Profile Visitors

192 profile views
  1. vilasaliv

    LC475 6R8 resistor blew

    I'm listing this board with the 68040 motorola processor on ebay. http://ebay.us/fclLTc?cmpnId=5338273189
  2. vilasaliv

    SE/30 connection between ASC and sound chips

    Is there anything like this bare Logic for amiga to our corroded se30? http://wordpress.hertell.nu/?p=587
  3. vilasaliv

    Performa 475 ethernet card

    I remember I had to install a apple NSI (if I remember) before the card driver. There is also a driver named "API 1.1Ethernet Installer.image" From http://vintageapple.org/macdrivers/nic/focus/ReadMe.txt "Filename: Ethernet Installer.image.sit.hqx Name: EtherLAN Card Installer (1.1.3) This software is the latest version of the EtherLAN Card Installer. This fixes a problem with our cards when installed into the Macintosh LC III. Use it ONLY with FOCUS Enhancements' NEWER EtherLAN Cards. These cards can be identified by the presense of a large square IC marked "SMC". Compressed disk image. Image created with Disk Copy 4.2. Stuffit 3.0 archive." By the way I will sell a coax lc pds card on ebay
  4. vilasaliv

    LC475 6R8 resistor blew

    As soon as I got my lc 475 running (It was 6y in a closet) I smelled burned fuse, heard some white noise for 5 sec and after that no sound from the speaker. The mac started up well besides that. Later I checked the sound was ok on the audio out but the speaker was silent all the time. The speaker works with a spare main board. I looked to the board and it has a resistor broke. A 6R8 resistor near the year of the board and the audio out (see picture). Is that resister the responsible for the non audio on internal speaker? Do you think a new one won't blow again? should I check something before I replace it? Do you know some similar experience and how was it solved? Thanks, SV, Portugal.
  5. vilasaliv

    LC575 Networking : PDS or Comm Slot?

    I have a comm slot Ethernet Card to sell
×