Jump to content

glay78

6502
  • Content Count

    38
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. glay78

    Brightness Knob on Macintosh SE

    This happens to my Macintosh Plus too. I recapped the analog board and it’s fixed.
  2. glay78

    Macintosh portable not working

    Have u tried this? 1. Put in both 6v and 9v battery. 2. Press and hold the both Reset and Interrupt switch located on the left side for 5 seconds. 3. Press any key on keyboard to power up. basically after you removed and reinsert your main battery without a 9v backup battery, you will need to reset the power manager by holding both reset and interrupt keys for 5 seconds. After which the Macintosh Portable should start up.
  3. Nice, there's another seller selling cheaper but same antenna. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254019367642
  4. Unplug the HDD and try to boot, see if you gets the flashing disk icon.
  5. My Mac Plus powered up on brightest settings and when I dimmed using the toggle it doesn't dim and it flickers. I think it needs a recap and I don't wish to recap the whole board. Anyone knows which caps do I change for the brightness control on the analog board?
  6. glay78

    TAM Not Booting Up

    Try this, disconnect the HDD ribbon and try booting up.
  7. glay78

    Macintosh color classic won't power on

    Not done. Only logic board was recapped. Yes looks like a PSU prob to me too.
  8. glay78

    Macintosh color classic won't power on

    Some updates, my CC as mentioned, flashes 5-6 times when trying to power on. I noticed I keep plugging in with rear power on and try powering via keyboard, it powers up after a day or two. Have to keep pressing power on keyboard at intervals after a day, the light stays longer each time until it powers on. Right after it power on, the screen will remain black until a minute or two then it will start normally. Is that some fault in th analog board?
  9. glay78

    TAM TV and Tuner driver

    Yes I saw them after I upgraded to OS 9.1, previously on OS 9 they wasn’t installed.
  10. I recently got a TAM with a non working LCD and HDD. Managed to swap it out with an LCD of PowerBook 3400 and an IDE44 to CF as HDD. Installed OS9 and I don’t see the TV and Tuner apps. How should I get it working?
  11. Yes the bottom left is broken and I can still glue it. But I’m missing the portion where it guides the door to open
  12. Oh sorry it’s the door that is broken not this portion.
  13. Haha i broke the left side when opening the case. For that I can stick back, how about the part that holds the tray when open?
  14. Cool and thank you. Yes keep the LCD well, hopefully it doesn’t comes handy. Do you you have any fix recommended for the broken door if CD drive?
×