Jump to content


  1. Important Information

    1. The 68kMLA Forum Rules   (10087 visits to this link)

      To quote vintage Apple manuals: "Read Me First!"

  2. Community Connections

    1. General 68kMLA News & Stuff

      What's going down in the barracks.

    2. Conquests

      Discuss your latest vintage Mac finds!

    3. Trading Post

      Feel free to trade all of your Mac goodies here with all honest intentions. The website provider assumes NO liability, so buyer beware! Please see this topic for more information.

  3. Projects & Hosted Forums

    1. RetroChallenge

      What can you do given only one month and strictly "retro" hardware? Find out with RetroChallenge!

    2. 68kMLA Wiki

      The creation and maintenance of the 68kMLA's information repository.

  4. 68k Model Forums

    1. Compact Mac

      Macintosh, 512k, SE, etc.

    2. Mac II, Quadra & Centris

      Just think, having a Quadra 950 in 1992 would be like having a Mac Pro today… except with more slots, more expandability, and on-board SCSI!

    3. 68k LC & Performa

      Ah, the consumer computers!

    4. 68k PowerBook

      From the Portable to the 190cs.

  5. PowerPC Model Forums

    1. NuBus Power Mac, LC & Performa

      The NuBus architecture gets a new brain!

    2. PCI Power Mac & Performa

      The PPC comes of age and adopts the industry standard expansion slot.

    3. G3/G4/G5 Power Mac, iMac & eMac

      From the Beige G3 to the quad-core G5, via various iMacs!

    4. PPC PowerBook & iBook

      All that power in a laptop? Never…

  6. Everything Else…

    1. Apple I, ][, /// & Lisa

      Not really 68k Macs, but certainly Vintage!

    2. Newton

      The best PDA ever finally gets its own forum!

    3. Software

      Includes system stuff, productivity, emulation, design, and games for pre-OS X Macs!

    4. Hacks & Development

      Yes, it's back! Hardware hacks/modifications and software development for Mac OS.

    5. Peripherals

      Anything you can hook up to your Mac or stuff into it as an interface!

  • Posts

    • So in this thread I found a pic provided by 9166188 of the pin situation between DB15 and VGA pinout       Bolle described the pinout of the 12 pins on the Radius card and JT737 seems to have connected the missing green and red lines on the card to the female DB 15 on the Radius clamp. But to which pins? And this approach is different from all the posts before, where the blue signal line was connected to the empty red and green pins/lines on the vga cable side. Since radius monitors are very rare I think it would make sense to manipulate the cable from the card to the clamp on the Mac side in a way, that you get a non blue pic with a standard db-15 to vga adapter. I am scared to destroy anything by connecting the wrong lines and would greatly appreciate, if someone could point me into the right direction how to best solve the blue screen problem practically.
    • Alright, I think I've got the driver working perfectly now. Only thing left to decide on is, what ROM checksum should I use?   Once I put the checksum in, we will be ready to send some 2MB SIMMs out to test before we do the commercial release. Who would like to test? We wanna give several units away to anyone who thinks they can do a thorough job testing. Please let me know if you're interested.   8MB SIMM will be coming soon. I've just gotta finalize the design files and send 'em to fabrication.
    • Gerbers attached.   BOM   -C1-C11: 0.1uF 1206 ceramic caps -C12, C13: 22uF/10V tantalum or electrolyte caps -R1: 330Ohm  -R2, R3: 220Ohm ->pad size is metric 1206 for all the above resistors and caps   -U5-U8: 32K x 8 SRAM 15ns SOJ (IS61C256AL-15JL, IDT71256SA15 and the like) -U9, U10: 8K x 8 TAG SRAM 12ns SOJ (ATT7C174J-12, IDT71D74S12... only exists as NOS, no modern replacement) -U1: GAL20V8 10ns (7ns works as well) PLCC28 -U2, U3: GAL20V8 7ns PLCC28 -U11: 74F74 SO14 -U12: 74F125 SO14   -J1: 1.27mm pitch 2 x 50 SMD pin headers   cachecard.zip
    • I did have that Weller iron, but when I switched to a Hakko 942 (now discontinued - FX-951 is a near current equivalent) it was night and day. The Weller is OK for many things but I think when you get into boards like this the better iron helps.   (but as I said, my iron couldn't melt that bit of solder either...)
    • Question--   Got the orangePC app working. However, I cannot get a dos boot disk to work. I have tried several methods making a boot disk, but I keep getting "non-system disk or disk error, replace and press any key when ready", so I am unsure if it is me or the card, or maybe the program? I know that when I press any key, the activity light on the floppy emu flashes.   I dont have a usb floppy drive or diskettes unfortunately. Whenever I load up any of the dos images, the screen shows a bunch of garbage on the third line. Not sure if thats normal or not.