RaSCSI: set up connection with MacTCP?

[Nixontheknight]

I'm lost on setting up my RaSCSI. I have the daynaport software installed, but I can't figure out how to set up the connection in MacTCP control panel. Does anyone know how to do this?

 

[kerobaros]

This threw me for a loop when I first tried to set it up also! The instructions I wound up following are as follows:

On the Mac side, in the TCP/IP or MacTCP control panel choose Manual and input:

IP address 10.10.20.2
Network mask 255.255.255.0
Router 10.10.20.1
Name server can be any DNS server; Google's Public DNS servers work well for this purpose

Found on the RaSCSI wiki. Update with how you get on with this info, we'll get you sorted out.

 

[Nixontheknight]

This threw me for a loop when I first tried to set it up also! The instructions I wound up following are as follows:

Found on the RaSCSI wiki. Update with how you get on with this info, we'll get you sorted out.

Oh, I get it now, I’m supposed to have it get this stuff manually. Thanks

 

[Nixontheknight]

This threw me for a loop when I first tried to set it up also! The instructions I wound up following are as follows:

Found on the RaSCSI wiki. Update with how you get on with this info, we'll get you sorted out.

Now I’m confused again. What do I put in this section? Everything I try just gives me an error 500 on macweb

 

[kerobaros]

I'm at work right now, so I can't check easily, but as I recall, I think I put 8.8.8.8 in the IP address field for the DNS, and left the domain blank. I believe this tells MacTCP to use 8.8.8.8 for all DNS lookups. I could be wrong though? Any MacTCP experts want to chime in here?

 

[dochilli]

What happens if you just use an empty field at Domain? What if you just use a dot (.)?

 

[Nixontheknight]

I'm at work right now, so I can't check easily, but as I recall, I think I put 8.8.8.8 in the IP address field for the DNS, and left the domain blank. I believe this tells MacTCP to use 8.8.8.8 for all DNS lookups. I could be wrong though? Any MacTCP experts want to chime in here?

You’re right. I fixed it last night