-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
PM 6400/6500 Subwoofer volume knob replacement
- Thread starter Fizzbinn
- Start date
Mine is broken off in a way that makes fitting a new one not just a case of pushing it on.
Ahh... well... what I did when this happened to mine was to find a tiny drill bit (I have a dremel and appropriate collet - but you can also use a hand drill) and carefully drill a hole in the center of the remains of the knob. Then use a toothpick with some super glue and poke that in the hole. Wait for it to set, then pull the knob remainder out.
HehAhh... well... what I did when this happened to mine was to find a tiny drill bit (I have a dremel and appropriate collet - but you can also use a hand drill) and carefully drill a hole in the center of the remains of the knob. Then use a toothpick with some super glue and poke that in the hole. Wait for it to set, then pull the knob remainder out.
I poked it with a pin to the level I wanted and then ignored it
If memory serves, and you feel like spending the time to remove the little board from the case, you can also poke the broken piece through from the back. Could even glue the stub back onto the knob if it's still nearby.
or just jam a (wooden, old skool) toothpick in there once you have the remains of the original out.
Do you have the rest of the number on the pot? It says 634something
634M on that one
Attachments
Similar threads
